We offer a great selection of Renishaw Products. We also focus on products related to CMMs as well as Vision Systems like Ram Optical and OGP. We thank you for the opportunity to earn your business and strive for your 100% satisfaction.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging.
Country of Manufacture: UNITED KINGDOM
Brand: RENISHAW
Model: PH10MQ PHC10-3 PLUS
MPN: A-1036-0001 A-5684-0100 A-5683-0100
Renishaw PH10MQ Motorized Probe Head and Renishaw PHC10-3 Probe Head Controller New with 1 Year Warranty. (The PHC10-3 Plus has now replaced the PHC10-3 Legacy)
About PH10
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.
All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matte black appearance.
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself. This option provides a neater and shorter probe mount, with only the A axis protruding from the quill.
| Length | 73 mm |
| Width | 80 mm |
| Weight | 730 g |
| Probe mounting | Autojoint (multiwire) |
| Head mounting | Direct to quill |
| Suitable controller | PHC10-2 |
| Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 62 mm |
| Total no. of positions | 720 |
| Max recommended drive torque | 0.45 Nm |
| Maximum extension bar | 300 mm (11.8 in) using PAA3 extension |
PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:
Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.
Checks and reports position
Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.
The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface.
PHC10-3 Specification
| Length | 180 mm |
| Width | 440 mm |
| Height | 44 mm |
| Weight | 1.5 Kg |
| Data transmission | RS232 or USB |
| Current Consumption (at 240V) |
less than 1 A |
| PSU electrical ratings |
Supply voltage: 100-240 V ± 10% Frequency range: 50/60 Hz Power consumption: 49 W max. Transient voltages: Installation category II |
| Input connectors | 15 way 'D' |
| Power supply | 24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor |
| Probe output connectors | 7-pin DIN or 9-way 'D' type |
|
Maximum cable length |
|
| Hand held control unit | HCU1 only |
PH10T or PH10M can be shipped for the same price.
RS 232 and USB communication for PHC10-3 Plus controller.
If your application requires custom cables please contact us. We also offer partial refunds for probing
that you have replaced with this system.
All components in this sale are new with 1 Year Warranty.
This is by far the best price you will find on a Renishaw PH10MQ Motorized Probe and PH10-3 Plus
Controller with 1 Year Warranty. Why pay retail prices when you can purchase new with warranty from
Metrology Parts. Purchase from Metrology Parts a Paypal verified retailer. If what you order is not what
you receive you will be refunded the full purchase price for this sale. Metrology Parts would like the
opportunity to earn your business for this sale and all of your future Renishaw product needs. If you
have any questions feel free to contact us. With 36 plus years of experience with Renishaw products we
can help with all of your application needs as well as your after sales support.
