We offer a great selection of Renishaw Products. We also focus on products related to CMMs as well as Vision Systems like Ram Optical and OGP. We thank you for the opportunity to earn your business and strive for your 100% satisfaction.
Condition:
New: A brand-new, unused, undamaged item in its original packaging.
Country of Manufacture: UNITED KINGDOM
Brand: RENISHAW
Model: PH10MQ PLUS PHC10-3 PLUS TP20
MPN: A-5863-6000 A-5863-0100 A-1371-0291 A-1371-0272 A-1051-0417
Item Description
Renishaw PH10MQ PLUS Motorized Probe Head, PHC10-3 PLUS Probe Head Controller (replaced the PHC10-2), PAA1 Autojoint & 3 TP20 Modular Touch Probe Modules New with 2 Year Warranty.
About PH10
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.
All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance.
The PH10MQ is a variant of the PH10M that allows the motorised head to be attached directly to the quill with the B axis of the head inside the quill itself. This option provides a neater and shorter probe mount, with only the A axis protruding from the quill.
| Length | 73 mm |
| Width | 80 mm |
| Weight | 730 g |
| Probe mounting | Autojoint (multiwire) |
| Head mounting | Direct to quill |
| Suitable controller | PHC10-3 PLUS |
| Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 62 mm |
| Total no. of positions | 720 |
| Max recommended drive torque | 0.45 Nm |
| Maximum extension bar | 300 mm (11.8 in) using PAA3 extension |
TP20 Introduction
This installation and user's guide supports the following Renishaw products:
* TP20 touch-trigger probe system which includes the probe body and probe module (inhibit and non-inhibit versions) * MCR20 probe module change rack (automatic operation) * TCR20 probe module change rack (automatic operation) *
The Renishaw TP20 touch-trigger probe is a 5-way or 6-way kinematic probe with the facility to change stylus configurations without the need for re-qualification. A direct replacement for the industry-proven Renishaw TP2, the TP20 can be easily retrofitted into existing TP2 applications to bring this additional facility to both manual and DCC co-ordinate measuring machines (CMMs).
The TP20 comprises a two-piece design – a probe body (with or without magnetic actuation device) and detachable probe modules. TP20 probe modules can be stored in the MCR20 where automatic changing of the probe module(s) is possible under measurement program control. The TCR20 rack should be used for TP20 probe module changing with a PH20 system.
Forming part of Renishaw's comprehensive CMM touch-trigger probe range, the TP20 is fully compatible with all Renishaw M8 probe heads, including those fitted with the Renishaw autojoint incorporating Renishaw's PAA range of adaptors and extension bars. Wherever necessary, probe reach may be increased in M8 applications by use of the Renishaw PEL range of extension bars.
PHC10-3 PLUS Head Controller
PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:
* Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM * Checks and reports position * Flags up errors, e.g. failure to reach position, obstruction before or after locking etc * The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface. *
| Length | 180 mm |
| Width | 440 mm |
| Height | 44 mm |
| Weight | 1.5 Kg |
| Data transmission | RS232 or USB |
| Current Consumption (at 240V) |
less than 1 A |
| PSU electrical ratings |
Supply voltage: 100-240 V ± 10% Frequency range: 50/60 Hz Power consumption: 49 W max. Transient voltages: Installation category II |
| Input connectors | 15 way 'D' |
| Power supply | 24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor |
| Probe output connectors | 7-pin DIN or 9-way 'D' type |
|
Maximum cable length |
|
| Hand held control unit | HCU1 HCU2 |
PH10T PLUS or PH10M PLUS can be shipped for the same price. PHC10-3 PLUS supports both RS 232 and USB communication. Please specify which modules you would like for the TP20, Low force, Medium force, Standard force, or Extended force in any combination. All items will be ordered from the factory for you which is why we have a 5 day handling time. Please contact us should your application require custom cables for your installation. We also offer partial refunds for probing that you have replaced with this system.
This by far is the best price for Renishaw PH10MQ PLUS Motorized Probe Head, Renishaw PHC10-3
PLUS Probe Head Controller (which has now replaced the PHC10-2) PAA1 Autojoint & 3 TP20 Touch
Probe Modules New with 2 Year Warranty. Why pay retail prices when you can purchase from
Metrology Parts. Purchase with confidence from a verified Paypal retailer. If what you order is not what
you receive you will get a full refund for this sale. Metrology Parts would like the opportunity to earn
your business for this sale and all of your future Renishaw needs. If you have any questions feel free to
contact us. With 36 plus years of experience with Renishaw products we can help with all your
application needs as well as after sales support.
