We offer a great selection of Renishaw Products. We also focus on products related to CMMs as well as Vision Systems like Ram Optical and OGP. We thank you for the opportunity to earn your business and strive for your 100% satisfaction.
Condition:
New: A brand-new, unused, undamaged item in its original packaging
Country of Manufacture: UNITED KINGDOM
Brand: RENISHAW
Model: PH10T PLUS PHC10-3 PLUS TP20
MPN: A-5863-5000 A-5863-0100 A-1371-0291 A-1371-0272
Item Description
Renishaw PH10T PLUS Motorized Probe Head & PHC10-3 PLUS Probe Head Controller. Renishaw TP20 Modular Touch Probe System with 3 Probe Modules New with 2 Year Warranty.
About PH10
The range comprises three PH10 models, each of which can carry a range of probes and extensions and can be orientated in 720 repeatable positions, giving access to the most difficult-to-reach workpiece features.
All three variants of the new PH10 heads are now supplied with a revised repeatability specification, down from 0.5 µm (2?) to just 0.4 µm (2?) (specified at a distance of 62 mm), giving users improved positioning at the stylus tip. The new specification heads are physically differentiated by a new ‘aqua blast’ finish which gives a modern, matt black appearance.
The PH10T is similar to the PH10M, except that it features an M8 thread probe mount in place of the autojoint.
All M8 threaded probes, such as TP20 and TP200, and extension bars fit directly onto the head. The PH10T is fully compatible with all of Renishaw's stylus and module change systems.
| Length | 103 mm |
| Width | 62 mm |
| Weight | 645 g |
| Probe mounting | M8 thread (2 wire) |
| Head mounting | Shank to suit CMM |
| Suitable controller | PHC10-2 PHC10-3 |
| Repeatability of position | 0.4 µm (0.00002 in) specified at a distance of 48 mm (equivalent to a TP2 and PS1R stylus) |
| Total no. of positions | 720 |
| Max recommended drive torque | 0.45 Nm |
| Maximum extension bar | 300 mm (11.8 in) using PEL4 extension |
TP20 Introduction
This installation and user's guide supports the following Renishaw products:
* TP20 touch-trigger probe system which includes the probe body and probe module (inhibit and non-inhibit versions) * MCR20 probe module change rack (automatic operation) * TCR20 probe module change rack (automatic operation) *
The Renishaw TP20 touch-trigger probe is a 5-way or 6-way kinematic probe with the facility to change stylus configurations without the need for re-qualification. A direct replacement for the industry-proven Renishaw TP2, the TP20 can be easily retrofitted into existing TP2 applications to bring this additional facility to both manual and DCC co-ordinate measuring machines (CMMs).
The TP20 comprises a two-piece design – a probe body (with or without magnetic actuation device) and detachable probe modules. TP20 probe modules can be stored in the MCR20 where automatic changing of the probe module(s) is possible under measurement program control. The TCR20 rack should be used for TP20 probe module changing with a PH20 system.
Forming part of Renishaw's comprehensive CMM touch-trigger probe range, the TP20 is fully compatible with all Renishaw M8 probe heads, including those fitted with the Renishaw autojoint incorporating Renishaw's PAA range of adaptors and extension bars. Wherever necessary, probe reach may be increased in M8 applications by use of the Renishaw PEL range of extension bars.
PHC10-3 PLUS Head Controller
PHC10-3 head controller receives instructions from the CMM control. The PHC10-3 controls all head functions and reports system status to the CMM:
* Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM * Checks and reports position * Flags up errors, e.g. failure to reach position, obstruction before or after locking etc * The PHC10-3 does not process any of the probe sensor signals. These are railed clean through the heads axes and controller to the probe interface. *
PHC10-3 PLUS Specification
|
Length |
180 mm |
|
Width |
440 mm |
|
Height |
44 mm |
|
Weight |
1.5 Kg |
|
Data transmission |
RS232 or USB |
|
Current Consumption (at 240V) |
less than 1 A |
|
PSU electrical ratings |
Supply voltage: 100-240 V ± 10% Frequency range: 50/60 Hz Power consumption: 49 W max. Transient voltages: Installation category II |
|
Input connectors |
15 way 'D' |
|
Power supply |
24 V DC 49 W provided by the Emerson PSU (DP4024N3M) power adaptor |
|
Probe output connectors |
7-pin DIN or 9-way 'D' type |
|
Maximum cable length |
50 m |
|
Hand held control unit |
HCU1 HCU2 |
This is by far the best price you will find on a Renishaw PH10T PLUS Motorized Probe Head, PHC10-
3 PLUS Probe Head Controller & TP20 3 Modules New with 2 Year Warranty. Why pay retail prices
when you can purchase new with warranty from Metrology Parts. Purchase with with confidence from
Metrology Parts a Paypal verified retailer. If what you order is not what you receive you will be
refunded the full purchase price for this sale. Metrology Parts would like the opportunity to earn your
business for this sale and all of your future Renishaw product needs. If you have any questions feel free
to contact us. With 36 plus years of experience with Renishaw products we can help with all of your
application needs as well as your after sales support.
